博鱼手机版app下载（中国）博鱼有限公司

S 博鱼手机版app下载（中国）博鱼有限公司

Replacing the filter element
2023-10-19
Filter and separate the solution, remove impurities with oilFailure to replace in a timely manner can cause machine tool alarms
C-axis maintenance
2023-10-19
The C-axis accuracy is out of tolerance.Adjust the straightness and verticality of the C-axisAdjusting the concentricity of the C-axisSet the origin switch for the C-axis
Repair handle
2023-10-19
The control handle signal is interrupted.Replace the FPB connection wire of the handle
Spindle maintenance
2023-10-19
Replace bearings, grind tapered holes, adjust tension, and replace shrapnel
Overhaul and maintenance of discharge motor
2023-10-19
Check and adjust the horizontal distortion of the machine toolCheck the air pressure and control unitCheck the oil pressure and control unitCheck the processing fluid levelCheck the lifting ...
Processing center alarm processing
2023-10-19
Processing center alarm processing
Installation and debugging of machining center
2023-10-19
Debugging level, power on, checking three-axis accuracy, installing various accessories
Discharging motor alarm processing
2023-10-19
Discharging motor alarm processing
Installation and debugging of discharge motor
2023-10-19
New machine installation or old machine relocationDebugging level, power on, checking three-axis accuracy, installing various accessories
Repair oil cooler
2023-10-19
Abnormal oil cooler, oil cooler not workingCompressor copper pipe leakageAdd refrigerant again and replace the copper pipe

«
1
2
»

Copyright © 2022 Shanghai Kunyi Machinery Hardware Co., Ltd.

非凡体育（中国）官方网站 | 大阳城游戏【中国】官方网站 | 华体_(中国)有限公司官网 | 十大正规网投平台-十大网投平台信誉排行榜（中国）有限公司 | 皇冠crown·(中国)官方网站 crown | 欧帝体育(集团)有限公司 | 亚娱体育（中国）有限公司 | 金莎3777官网（中国）有限公司 | 博鱼APP下载（中国）博鱼有限公司官网 |